Gold Horizons Spa Super Cleanse (10 x 20 g Tablets)
- Gold Horizons Spa Biofilm Remover (10 x 20 g Tablets).
- Powerful spa pipework cleaner.
- Destroys biofilm and helps remove bacteria.
Gold Horizons Spa Super Cleanse is a highly effective and powerful spa pipework cleaner which removes biofilm.
£27.95
Availability: In stock
Only 3 left
SKU
GHSBIOFILM
Gold Horizons Spa Biofilm Destroyer is a highly effective cleansing agent that penetrates the biofilm and helps remove bacteria. Warm hot tub can provide the ideal breeding ground for bacterial growth. As this begins to attach to spa pipework and surfaces, biofilm can begin to form. Biofilm is extremely resistant against chlorine and can harbour bacteria and other pathogens.
| SKU | GHSBIOFILM |
|---|---|
| Barcode Number (GTIN) | None |
| Brand | Gold Horizons |
| Weight | 0.200000 |
| Used In | Hot Tubs (Hard Shell), Hot Tubs (Vinyl), Inflatable Spas |
| Used For | Biofilm |
| Instructions for use | Caution: Do not use hot tub during treatment. DO NOT touch tablets or allow them to get wet prior to adding to the hot tub water. 1. Remove and thoroughly clean cartridge filters before returning to service. 2. Ensure free chlorine or total bromine levels are within the recommended range of 3 - 5 mg/l (ppm). 3. Only use Gold Horizons Spa Biofilm Destroyer prior to draining down your hot tub. 4. Remove any soft head rests that may be fitted. 5. Isolate any chlorine or bromine feeder prior to Spa Biofilm Destroyer treatment. 6. Refer to the table below for number of tablets required pe treatment. 7. Wear protective gloves and eye protection when handling this product. Remove the required number of sachets from the sealed container. Use scissors to cut open the sachet and carefully drop the tablet into the hot tub water with the pump(s) running. 8. Leave the deep clean treatment for 60 minutes with the pump(s) running. After treatment, turn the pump(s) off and drain all the water to waste. 9. Refill with fresh water and return hot tub water to recommended chemical levels. Dose rates: Add 1 tablet for 500 - 1,999 litres (110 - 440 gallons) of water. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS. |
Write Your Own Review