Skip to the beginning of the images gallery

Intex Electric Pool Heater – New model 2024

Electric heater suited for above ground pools up to 12ft (3.6m). Includes pool thermometer.
With water level sensor. 2.2 Kw output.
Easy to connect and operate. UK 3 pin plug.
For new pools or for retrofitting.
nb. YOUR PUMP FLOW MUST BE AT LEAST 800 gph (3,636 ltr) otherwise it will trip out. !! *Not suitable for the smaller Intex pumps.

Intex 28684 Electric Pool Heater, new model Season 2024 with push button switch. Suitable for above ground swimming pools up to 12ft (3.6m) 5,621 L / 1,236 gal water capacity. Perfect to increase the pool water temperature. Manufactured with UK 3 pin plug. Includes pool thermometer. PLEASE NOTE: Maximum quantity per order is 4. For a larger quantity, please place multiple orders. Thank you.

£99.00

Availability: In stock

SKU

28684

Buy 4 for £85.00 each and save 14%

Electric pool heat pump with with push button switch, and water level sensor, compatible with round Easy Set / Metal Frame above ground pools 12' (3.6m) diameter, 14ft x 7ft x 3 ft (4.5m x 2.2m x 85cm) rectangular pools or smaller (maximum 2,081 gallons / 9,463 ltr / 2,500 US gallons, water capacity). Working water temperature: 17 degrees Celsius to 35 degrees Celsius (PLEASE NOTE: The ambient temperature of the air and water have an effect on the water heat up efficiency. The heater will perform best in the summer months. Most of the heat is lost at night time, so using a solar cover will help reducing the heat loss. Also, for best performance keep the filter clean and replace it every two weeks when the pool is in heavy use. Dirty filters might cause tripping as the water flow is reduced. Easy hook-up (easily connects to new or existing pool filter system) and operation. Includes one hose 1.25" (32mm) fittings, includes pool thermometer. Model HT30221-2. UK 3 pin plug. Voltage: 220-240V. 2.2 kW output. PLEASE NOTE: The filter pump must be operating before turning on the heater. The heater must be plugged in directly to a socket and not used on an extension lead unless it is a heavy duty lead !! Note: amendment to page 7 in the manual. If the power is disconnected, the RCD will trip and will require manual reset when the power comes back on.

OFFICIAL UK DISTRIBUTOR

All electrical Intex accessories are manufactured with UK 3-pin plugs. No adapters required for the UK!

All returns handled within the UK

Telphone advice and guidance available